Processzor; Removing The Processor - Dell Alienware Aurora R11 Service Manual

Steps
1. Place the processor fan and heat-sink assembly on the processor.
2. Align the captive screws on the processor fan heat-sink assembly with the screw holes on the system board.
3. In sequential order, tighten the four captive screws that secure the processor fan and heat-sink assembly to the system
board.
4. Connect the processor-fan cable to the system board.
5. Rotate the power-supply unit cage towards the chassis.
6. Connect the power cables to the graphics card.
7. Slide the power-supply unit cage release latches towards the locked position.
Next steps
1. Install the left-side cover.
2. Follow the procedure in

Processzor

Removing the processor

Prerequisites
1. Follow the procedure in
2. Remove the left-side
74 Alkatrészek eltávolítása és beszerelése
After working inside your
Before working inside your
cover.
computer.
computer.