Care And Cleaning - Hamilton Beach 58146-CL Manual

Care and Cleaning

1. Unplug blender from electrical outlet.
2. Wipe blender base, control panel, and cord with a damp cloth or
sponge. If juicer attachment is included, wipe juice cup base and
shaft adapter. To remove stubborn spots, use a mild, nonabrasive
cleanser.
3. Carefully wash blender jar, cutting blade assembly, filler-cap,
collar, and lid in hot, soapy water. Care should be taken when
handling the cutting blade assembly as it is very sharp. If
juicer attachment is included, carefully wash juice cup, pulp
control basket, and reamers in hot soapy water. Rinse and dry
thoroughly. Do not soak. These parts may also be washed in a
dishwasher.
4. Store blender with lid ajar to prevent container odor.
EASY CLEAN
To Easy Clean, pour 2 cups (473 ml) warm water in jar and add 1 drop liquid dishwashing detergent. Run the blender on EASYCLEAN for
10 seconds. Discard soapy water. Rinse with clean water.
This function is not a substitute for regular cleaning as instructed in "Care and Cleaning." This function should never be used when
blending any mixture containing eggs, milk, or any other dairy products, meats, or seafood.
The Easy Clean function should only be used to rinse the blender between batches of processing the same food. When the processing
of a single type of food is finished, the blender should be disassembled and thoroughly cleaned as instructed in "Care and Cleaning."
9
w WARNING Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord,
plug, base, or motor in water or other liquid.