Error Codes - Clavia nord lead 3 Service Manual

Error Codes

Boot error codes:
E.0 Recv SysEx error (overflow or other low level error)
E.1 Recv begin error (SysEx begin message error)
E.2 Recv data error (SysEx data message error)
E.3 Recv end error (SysEx end message error)
E.4 OS erase error (can't erase OS in Flash)
E.5 OS write error (can't write OS to Flash)
E.6 No OS detected (no OS in Flash)
E.7 OS load error (OS with errors in Flash)
E.8 Flash init error (can't init Flash chip(s))
E.9 Flash unknown (unknown Flash chip(s))
Clavia DMI Service manual Nord Lead 3 rev. 1.1 Page 6