Error Codes - Clavia Nord Modular G2 Service Manual

Error Codes

EEPROM ERRORS:
"ERR: check U36"
-check U36, U14 (pin 35,43), R152 and R66
DSP TEST ERRORS:
Error message will indicate if the error is on main board or expansion board (if installed)
For example "ERR: Mnb Uxx boot" or "ERR: Exp Uxx SRAM"
"ERR: Mnb/Exp Uxx boot"
"ERR: Mnb/Exp Uxx SRAM"
"ERR: SDOx Mnb/Exp Uxx"
SDOx = SDO1-SDO3
FLASH TEST ERRORS:
"ERR: Check U7/U37"
-check U7 or U37
Clavia DMI
(DSP not starting)
(Ext DSP memory error)
(Serial bus error)
Mnb Uxx = U16-U20, Exp Uxx = U5-U8
Service manual Nord Modular G2 rev. 1.2 Page 7