Table of Contents
Advertisement
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1.
Disconnect the power to the drying cabi-
net.
2.
Remove the component panel (see page
4-2 for the procedure).
REMOVING THE CABINET DOOR
3.
With the cabinet door closed, remove the
two screws from the top pivot bracket and
remove the bracket.
Top Pivot Bracket
& Screws
4.
Carefully open the cabinet door, lift the
bottom pivot pin out of the bracket, and
remove the door.
4-10
Cabinet Door
Advertisement
Table of Contents
