PREPARATION
Initial set-up
Setting the current date and time
When the station is powered up for the rst time, set the
current date and time.
1
If the monitor is o , tap the screen to turn on the
LANGUAGE 1/2 screen.
2
Tap desired display language, then tap
3
Tap
to set the date and time.
4
Tap the proper time zone from the list of time
zones.
>
<
Tap
or
to change the pages of the list.
*
5
Tap
to apply changes.
The CURRENT TIME screen is shown.
6
Set the day, month, year, hour, and minute
individually by taping
Day
Month
7
When the setting has nished, tap
■ To correct date and time
Correct the current date and time any time by following the
.
procedure below.
1
From the MENU screen, tap
Current Time .
2
Set the day, month, year, hour, and minute
individually by tapping
3
When the setting has nished, tap
NOTE:
A maximum of 60 seconds time gain/loss can occur in the
•
displayed time over a month. It is recommended to correct the
time periodically.
When the station is connected to the internet, the date and time
•
are automatically corrected.
If there is no power supply for 15 minutes or more, the date and
•
time return to default.
Changing the display language
The display language for the screen is set to English by
default. First, select a language as follows.
1
From the MENU screen, tap
The LANGUAGE screen is shown.
2
Tap desired language, then tap
>
Tap
or
*
- 7 -
or
.
Year
Hour
Minute
Date/Time
or
.
Language .
<
to change the pages of the list.
.
.
.