Getting Started; Step 1: Install Software - Creative Wireless Music User Manual

Getting Started

DO NOT connect your Receiver to your computer until you have installed the
software.

Step 1: Install Software

1. Turn on your computer and make sure your wireless router or access point
is set up and working properly.
• If your wireless router or access point can be configured as a DHCP server, enable
this feature. This makes it easier to add other devices to your wireless network.
• If you are setting up multiple Receivers, make sure you set them up one at a time.
2. Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running
automatically. If not, you need to enable the Windows auto-insert
notification feature for your CD-ROM/DVD-ROM drive. For more
information, see "Installation and Configuration" on page 41.
Getting Started 6