Siemens 7SR45 Manual page 76

Reyrolle

Hide thumbs Also See for 7SR45:

Table of Contents

In Service Operation

6.6 Indications

Reset via Communication Protocol

You can initiate acknowledgment of stored indications also via communication through a connected substa-

tion automation technology system. This can occur in conformance to standards (Modbus RTU,

IEC 60870-5-103) or via configuration (mapping) of the LED reset input signal for any protocol. Stored LEDs,

output contacts, and spontaneous fault displays are reset.

Reyrolle, Operating, Manual

C53000-B7040-C101-1, Edition 08.2020

Table of Contents

Reyrolle 7sr45