Siemens 7SR45 Manual page 18

First Steps
1.3 Electrical Inspection
Safety Notes
!
DANGER
Danger during electrical inspection
Noncompliance with the safety notes will result in death, severe injury or considerable material
damage.
Comply with all given safety notes when carrying out the electrical inspection.
²
Note that hazardous voltages are present when you perform the electrical inspection.
²
During the electrical inspection, check that the device becomes ready for operation once it has been
²
connected to the power supply.
Performing the Electrical Inspection
Connect the power supply, where applicable for the devices ordered with auxiliary supply option.
²
Activate the power supply.
²
If the device does not assume the normal operating state (process mode), switch off the power supply.
²
Disconnect the wiring and the earthing.
Pack this device and return it to the manufacturer, stating the defect. Use transport packaging that meets
²
the requirements of standard ISO 2248.
18 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020