Hoover GLOBE User Instructions page 5

PREPARINg YOUR CLEANER
Position the cleaner in the upright
7
position. Then attach the other end of
the connector hose to the main body of
the cleaner.
Secure the dusting brush onto the dusting
10
brush post.
Position the hose in the hose cradle and
8
clip it in place.
Secure the turbo brush* onto the
11
separator lid.
(Certain models only)
- 4 -
Position the handle at the top of the
9
main body. Depress the handle release
button and slide the handle down until it
clicks into place.
IMPORTANT: If you need to access the
12
internal electric power connector press
the upright lock release pedal and lower
the main body to the floor. Release the
locking clips for access.
gB