Specifications; Storage Instructions - HoMedics ELLE MACPHERSON THE BODY Instruction Manual

Ipl hair reduction device
Hide thumbs Also See for ELLE MACPHERSON THE BODY:
Table of Contents

Advertisement

IB-IPL100GB-0313-01_Layout 1 18/06/2013 15:01 Page 13
Can the IPL be used to remove facial hair such as chin hair?
Yes, IPL may be used below the cheek line, on the upper lip, cheek, jaw, chin and neck. Do not use IPL near
your eyes! Men should not use the device for facial treatment.
Can men use the IPL?
Yes, IPL is suitable for men, however men should not use the device for facial treatment. Male body hair,
especially on the chest will generally require more hair reduction sessions.
How do I get more cartridges?
To order more cartridges visit your local stockiest or www.homedics.co.uk

SPECIFICATIONS

Emitted Light Spectrum: 475[nm] to 1,200[nm] Max.
Emitted Energy Flux: 5 [Joules/cm²]
Selectable Energy Levels: 6 levels
Treatment Area (regular window): 7 [cm²]
Speed: 1 pulse every 3 seconds: 2.3 [cm² per second]
Max pulses in lamp: 5,000 (15,000 in replacement cartridges)
Power Supply: 100-240 VAC, 50-60Hz
Technology: Home use IPL

STORAGE INSTRUCTIONS

Storage and Transport Conditions
Temperature
Humidity
Pressure
Temperature
Humidity
Max Operating Altitude
Plug (GB ONLY)
If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug,
fitted with a 3A BS 1362 fuse. Only use a 3 amp fuse with this appliance. Care must
be taken when changing the plug. If in doubt, contact a qualified electrician.
WEEE explanation
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
-10 to 70 ºC
0 to 90% RH at 55[ºC]
non-condensing
Operating Conditions
10ºC to 40ºC
30% to 70% RH
10,000 ft
13

Advertisement

Table of Contents
loading

Table of Contents