Accessory Usage Guideline - Bryant QUANTUM PLUS 650A User Manual

Thermostat—Auto Changeover, Non-Programmable, °F/°C, 2-Stage Heat, 1-Stage Cool
Thermostat—Auto Changeover, 7-Day Programmable, °F/°C, 2-Stage Heat, 1-Stage Cool
Thermostat—Auto Changeover, 7-Day Programmable, °F/°C, Dual Fuel, Includes Outdoor
Sensor (TSTATXXSEN01)
Thermidistat™ Control—Non-Programmable/Programmable Thermostat with Humidity
Control (For use in Dual Fuel, AC, HP, and 2S applications. Includes Outdoor Air
Temperature Sensor.)
Builder's Thermostat—Manual Changeover, Non-Programmable, °F/°C, 2-Stage Heat,
1-Stage Cool, Heat Pump
Outdoor Air Temperature Sensor
Backplate for Non-Programmable Thermostat
Backplate for Programmable Thermostat and Thermidistat™ Control
Backplate for Builder's Thermostat
Thermostat Conversion Kit (4 to 5 Wire)—10 Pack
* Do not use in zoning heat pump applications.
† This plate is designed to cover surrounding wall area located behind thermostat.
‡ Thermostat conversion kit is a 24-vac accessory that can turn a 4-wire thermostat application into a 5-wire application. This kit can also be used
to replace a broken thermostat wire, or add an extra wire when needed.
** Outdoor air temperature sensor is an accessory for all Bryant electronic thermostats, except the non-programmable air conditioner version and
builder's thermostats. It allows the temperature at a remote location (outdoors) to be displayed on the thermostat.
The outdoor air temperature sensor must be used with the dual fuel thermostat.
The outdoor air temperature sensor is included with the Thermidistat Control and dual fuel thermostat.
ACCESSORY
Crankcase Heater
Evaporator Freeze Thermostat
Compressor Start Assist—Capacitor and Relay
Puron Low-Ambient Pressure Switch
Wind Baffle
Support Feet
Puron Hard Shutoff TXV
Puron Liquid-Line Solenoid Valve for Heating
* For tubing line sets between 50 and 175 ft and/or 20 ft elevation difference between indoor and outdoor units, refer to the Application Guideline
and Service Manual for Residential Split-System Air Conditioners and Heat Pumps using Puron Refrigerant.
† Required for all applications.
THERMOSTATS AND ACCESSORIES

ACCESSORY USAGE GUIDELINE

REQUIRED FOR LOW-AMBIENT
APPLICATIONS
(Below 55°F)
See Low-Ambient
Pressure Switch Instructions
Recommended
—6—
TSTATBBNHP01-B
TSTATBBPHP01-B
TSTATBBPDF01-B*
TSTATBBPRH01-B*
TSTATBBBHP01*
TSTATXXSEN01
TSTATXXNBP01†
TSTATXXPBP01†
TSTATXXBBP01†
TSTATXXCNV10‡
REQUIRED FOR LONG-LINE
Yes
Yes
Yes
Yes
Yes†
No
APPLICATIONS*
(Over 50 Ft)
Yes
No
Yes
No
No
No
Yes†
See Long-Line
Application Guideline