Table of Contents
Advertisement
WALL MOUNT INSTRUCTIONS
1. If necessary adjust mounting bracket to wall mount position. To alter the mounting
bracket angle, pull the lever up and rotate the mounting wedge (see drawing below).
2. Connect the adapter and the line cord. See Steps 1 & 2 under "Installation" for
specific instructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount posi-
tion, plug the short end of the coiled cord into the handset, and then plug the other end
of the cord into the base.
4. Place the handset on the base.
FACTORY PRESETS
The following table shows you the factory settings for your unit:
Display
SELECT LANGUAGE
STUTTER TONE
ENTER AREA CODE
SET LDS CODE
EDIT TIME & DATE
FLASH TIMER
RINGER CADENCE
RINGER VOLUME
VOICEMAIL NUMBER
#3 SEC PAUSES
VM PASSWORD
Note: After you have set up the unit completely for the first time, use the MENU button
to review or reprogram the Language, Area Code, Program VM, LDS Code, or Setup
Features.
U
S
NIT
ETUP
Setting
English
No
no setting
1
no setting
600 ms
3
5
no setting
no setting
no setting
3
Lever to alter angle.
Advertisement
Table of Contents
