Handheld Configuration; Controls And Functions - PRESIDENT RANDY FCC Instruction Manual

The reading on the Meter should be as near as possible to 1. If
this is not the case, re-adjust your antenna to obtain a reading
as close as possible to 1. (An SWR reading between 1 and 1.8 is
acceptable).
- It will be necessary to re-calibrate the SWR meter after each
adjustment of the antenna.
WARNING: In order to avoid any losses and attenuations in ca-
bles used for connection between the radio and its accessories,
PRESIDENT recommends to use a cable with a length less than
118.11 inches (3 m).
Your CB is now ready for use.
B) HANDHELD CONFIGURATION
1) INSTALLATION
- Screw the flexible antenna (C2) on the device.
- Check that the battery is fully charged. See § CHARGING THE
RANDY FCC page 20.
Your CB is now ready for use.
C) CONTROLS AND FUNCTIONS
C2 Flexible antenna
A External microphone plug
B External speaker plug
C Internal microphone
D Internal speaker
E Battery Pack Door
C4 Microphone Support
C5 Belt clip
1 On/Off - Volume
2 LCD
3 UP s / DOWN t Keys
4 key - MENU key
5 SCAN key - DW (Dual Watch) key
6 EMG (Emergency) key
7 VOX key
8 MON (Monitor) key -
9 ANL/NB key - HI-CUT key
10 CB/WX key - ALERT key
Compander key
8