It is considered improper use when the product is used for any application not named in the corresponding instruction manual. Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/ accessories.
The MKH 418-S is connected via a 5-pin XLR cable. The con- nector of the MKH 418-S has standard pin assignment: Pin 1 = Casing/ground...
Page 4
of the S signal influences the spatial effect and should be cho- sen in each case in accordance with the recording situation. In order to avoid restricting the possibilities of designing the sound impression, MS – XY matrixing in the microphone was not employed.
(eg: with a high-pass filter). Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.