1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
WLAN
card.
5. Remove the
WWAN
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
hinge
caps.
9. To remove the display panel:
a. Remove the two (M2.0 x 2.0) screws on the panel [1].
b. Lift the bottom edge of the display panel [2].
c. Slide the display panel away from the system from the bottom [1], and flip the display panel over [2].
Before working inside your
computer.
Disassembly and reassembly
35