Installing Memory Module; Heat Sink; Removing Heat Sink Assembly - Dell Latitude 7480 Owner's Manual

Installing memory module

1. Insert the memory module into the connector until snaps in.
2. Connect the battery cable to the connector on the system board.
3. Install the base cover.
4. Follow the procedures in

Heat sink

Removing heat sink assembly

Heat sink assembly consists of heat sink and the system fan.
1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. To remove the heat sink assembly:
NOTE: To identify the number of screws, see
a. Disconnect the fan cable from the system board [1].
NOTE: After removing the heat sink assembly, ensure to disconnect the fan cable.
b. Remove the M2.0 x 5.0 screws that secure the heat sink assembly to the system board [2].
22 Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
screw list.