Mazda MX-30 2022 Owner's Manual Leaflet page 27

6. Do the following operation within 5
seconds after the sound is activated
to program the driving position.
Programming to a position

memory switch
Press the switch you want to
program, either 1 or 2 switch.
Programming to the transmitter

Press the unlock switch on the
transmitter.
A sound is activated when the
operation is completed correctly.
NOTE
If you do not perform the operation

correctly, a sound indicating that the
programming has failed is activated.
If the angle of the outer mirrors only

changes a little, the angle of the
outer mirrors may not have been
programmed correctly.
If the angle of the outer mirrors is

adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Calling up the programmed driving
position
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The seat
moves automatically while the seat
memory function is operating and
fingers or hands could get pinched and
injured.
NOTE
When adjustment of the driving

position is not necessary, a sound is
not activated.
The driving position adjustment is

canceled in the following cases:
The seat adjustment switch on the

driver's seat is operated.
The angle of the outer mirrors is

adjusted.
The SET switch is pressed.

Programming switch 1 or 2 is

pressed.
The lock switch or unlock switch

on the transmitter is pressed.
The vehicle starts moving.

The active driving display is

adjusted.
The selector lever is shifted to a

position other than P.
The walk in switch is operated.

Using the position memory switch
1. Make sure the parking brake is on.
2. Make sure the selector lever is in
the P position.
3. Switch the power switch ON.
4. Press the programming switch for
the driving position you want to call
up (switch 1 or 2).
5. A sound is activated when the
adjustment to the programmed
driving position is completed.
Using the transmitter
1. Unlock the driver's door using one
of the following methods.
Touch the sensing area of the

door release touch sensor.
Press the unlock switch on the

transmitter.
2. When you open the driver's door
within 90 seconds after unlocking
the doors, the adjustment of the
following parts starts.
Driver's seat

Active driving display (When the

power switch is switched ON, the
Essential Safety Equipment
Seats
2-11