Mazda MX-30 2022 Owner's Manual Leaflet page 171

Signal
*
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) Standby Indication
*
Traffic Jam Assist (TJA) Standby Indication
(White)
*
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) Set Indication
*
Traffic Jam Assist (TJA) Set Indication
(Green)
*
Smart Brake Support (SBS) OFF Indicator Light
*
Emergency Lane Keeping (ELK) OFF Indicator Light
*
Cruise Standby Indication
(White)
*
Cruise Set Indication
(Green)
*
1 The light turns on when the power switch is switched ON for an operation
check, and turns off a few seconds later or when the EV system is started. If the
light does not turn on or remains on, have the vehicle inspected by an
Authorized Mazda Dealer.
*
2 The light turns on continuously when the parking brake is applied.
▼ Wrench Indication/Indicator Light
The wrench indication/indicator light
is displayed/turns on under the
following conditions.
When the preset maintenance

period has arrived.
Refer to the Information section in
the Mazda Connect Owner's
Manual.
Instrument Cluster and Display
Indicator
*1
*1
CAUTION
When the maintenance period
arrives, have your vehicle inspected
by an Authorized Mazda Dealer as
soon as possible. If maintenance is
neglected, a decrease in vehicle
performance may occur which
could cause damage. Have your
vehicle inspected before the
maintenance period arrives.
When Driving
Refer to
4-114
4-122
4-114
4-122
4-143
4-135
4-176
4-176
4-23
*Some models.