Ricoh BL-P1 Series Service Training page 32

Image Fusing and Paper Ejection
Fuser unit
Toner is fused to the paper by the heat roller and pressure roller of the fuser unit.
Paper moves along the outer chute and is ejected face-down into the output tray by
the eject rollers.
The eject actuator detects whether or not paper is ejected from the fuser unit (jam
detection). When a paper jam is detected near the eject actuator, the main motor
reverses to disengage the gears. The eject rollers become free, allowing the paper
jam to be cleared.
No additional notes.
Heat roller Pressure roller
32
Eject rollers
Outer chute
Eject actuator