Basic Functions (Ios) - Siemens Simotics Connect 400 Operating Instructions Manual

Maintenance

8.4 Basic functions (iOS)

Function
Reset user credentials
Restart
Reset to factory set‐
tings
8.4 Basic functions (iOS)
You can find the most important basic functions for the connectivity module in the dashboard
view of the "SIDRIVE IQ Config" application.
102
Description
Resets the user name and the connectivity module password to the factory settings.
Note:
This function requires additional entry of the WLAN password. This ensures that only authorized
persons can reset the user login information. If the WLAN has not yet been configured in SC400, the
"WLAN password" field must remain empty.
The connectivity module restarts. The connection to the connectivity module is disconnected. Meas‐
urement data that has still not been transferred to SIDRIVE IQ Fleet is lost. To avoid this data loss, run
the "Send data to MindSphere" function before you restart the connectivity module.
Restores the factory settings of the connectivity module. The user credentials are reset to the factory
settings. All of the saved motor data and onboard information are lost.
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE