Electrolux LP21Y Quick Manual page 15

Water doesn't enter in the washing machine.
The faucet is closed.
The filter in the water
inlet hose is clogged.
No water comes out of
the faucet.
The inlet hose is folded
or strangled.
Wrong voltage.
If the clothes get stained.
Too much softener and/
or soap.
The water of the house
is dirty.
Internal cleaning of the
washing machine wasn't
done.
It was mixed clothes of
different fabrics.
The clothes are not
adequate to wash in the
washing machine.
There are lints in the clothes.
It was mixed clothes of
different fabrics.
The lint filter is dirty.
If the drum downs.
Washing machine
suspension system.
If the lid does not open.
The safety lock is
activated because
the machine is in the
spinning step.
Open the faucet.
Clean the filter.
Check the hydraulic
system of the residence.
Unfold or clear the hose.
Check the correct
voltage for your washing
machine.
Use the quantity
recommended.
Install a filter in the
faucet.
Clean the washing
machine as
recommendations.
Separate the clothes
according to the table
programs indicated on
the panel, or according
to Tips and Advice.
Check the instructions in
the clothes labels.
Separate the clothes
according to the table
programs indicated on
the panel.
Clean the lint filter.
It is normal the drum
downs when full of
clothes and water.
Wait a few minutes to
release the lid.
If the LED of the washing options doesn't turn ON
and the key beeps intermittently when pressed.
The option selected is
not allowed to washing
program selected, eg.:
- DELICATE program +
TURBO DRY option.
The washing step is in
rinse step.
If the LED of the ON/OFF key is flashing.
Wrong voltage.
If after start of washing, when trying operating one
of the washing options the LED does not lights and
the key beeps intermittently.
You cannot trigger this
option during execution
of the step cycle.
Do not operate this
washing option for that
washing program.
It is not allowed any
washing option when
the washing machine is
in the rinse step.
Connect the machine to
the correct voltage.
Select the option before
the step or cycle.
15