Advertisement
Concord Eye-Q 4060AF
Why do the images on my LCD appear blurry?
Your camera comes with a protective film that covers the LCD. If this film is not
peeled off, images will appear blurry and foggy on the LCD. Please make sure this
film has been removed.
If you continue to see blurry images on the LCD, it may be that the camera was
moved during picture taking or the subject was out of the defined focus range. Please
hold the camera steady while taking the picture and make sure there is at least 1 m
(3.3 ft.) between the camera and the subject. When using the macro mode feature, the
distance between the camera and the subject is at least 20 cm (0.66ft.).
How can I get better battery performance for my digital camera?
• When power is in short supply, it is best to avoid the camera functions that consume
the most power.
1. Avoid using the LCD monitor when you want to extend the battery life.
2. Using the LCD monitor consumes the most battery power.
3. Use only the viewfinder for taking pictures.
4. Turning the zoom on and off forces the zoom lens to extend and retract with each
power cycle. Avoid using the zoom when possible.
5. Avoid using the flash.
6. Use an external card reader whenever possible.
7. Take advantage of external power sources whenever you can.
• Use rechargeable Nickel-Metal Hydride (Ni-MH) batteries. Have two sets of
batteries, one set in the camera and one charging or in reserve for when you need to
swap them out.
• Store charged spare batteries in the coolest place you can find (at or above freezing)
but be sure to bring cold batteries back up to room temperature before using them.
• Store and use your camera and batteries as close to room temperature as you can.
Note: Rechargeable batteries often get up to two times as many shots on a fresh
charge.
Advertisement
