Using The Karaoke Function; Audio Adjustments - Pioneer DEH-X500BT Owner's Manual

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 13 Friday, March 16, 2018 3:00 PM
8
Launch Pioneer ARC APP on the mobile device via USB connection.
Press and hold M.C. dial via Bluetooth connection.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE
CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth
connection). Depending on your mobile device, it may not operate correctly.
Listening to music on Android
1
Press SRC/OFF to select [ANDROID].
Basic operations
Purpose
Select a track
Fast forward or reverse
Pause/resume playback

Using the Karaoke Function

WARNING
• A driver should never sing with a microphone while driving. Doing so may result in an accident.
• Do not carelessly leave a microphone for preventing an accident.
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around the steering column,
brake pedal or shift lever, which may cause an accident. Be sure to install the microphone in such a way
that it will not obstruct driving.
NOTES
• Use a commercially available dynamic mic and not the supplied microphone.
• This function is not available when the selected source is the following.
– RADIO
– AUX
1
Insert the stereo mini plug of your microphone into the AUX input jack.
2
Press and hold to activate the karaoke mode.
When the karaoke mode is activated, the volume on the unit is muted. Adjust the
microphone volume on the [MIC VOL] setting.
Operation
Press or .
Press and hold or .
Press 4/PAUSE.
NOTE
You can also activate the karaoke mode in the MICROPHONE settings (page 14).
To adjust the microphone volume
1
Press and hold to display [MIC VOL].
2
Turn the M.C. dial to adjust the volume level.
NOTES
• You can also adjust the microphone volume in the MICROPHONE settings (page 14).
• If howling occurs when using the microphone, keep the microphone away from the speaker or lower
the microphone volume.

Audio Adjustments

You can also make various adjustments in the AUDIO settings (page 15).
Adjusting the cut-off frequency value and the slope
value
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 15).
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [AUDIO], then press to confirm.
3
Turn the M.C. dial to select [CROSSOVER], then press to confirm.
4
Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to
confirm.
5
Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),
then press to confirm.
6
Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit
(filter) selected in step 4, then press to confirm.
[25HZ] to [250HZ]
19_806_807ME_QRI3104(A5_Horizon)
13
En
DEH-X500BT/DEH-S4150BT