Advertisement
Available languages
Available languages
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 15 Friday, March 16, 2018 3:00 PM
Menu Item
Description
PLAY
Start playback.
STOP
Stop playback.
AUDIO settings
Menu Item
Description
EQ SETTING
[SUPER BASS], [POWERFUL],
Select or customize the equalizer curve.
[NATURAL], [VOCAL], [CUSTOM1],
• When you select a setting other than
[CUSTOM2], [FLAT]
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing and
Select an equalizer band and
holding the M.C. dial, then store the
level for further customizing.
customized equalizer curve in [CUSTOM1].
Equalizer band: [50HZ] to
[12.5kHZ]
Equalizer level: [–6] to [+6]
FADER*1
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
SUBWOOFER
[ON], [OFF]
Set to [ON] when using a subwoofer speaker.
SUBWOOFER*2
[NOR], [REV]
Select the subwoofer phase.
SPEAKER LEVEL
Types of speaker: [FRONT L],
Select a speaker unit (filter) and adjust the
[FRONT R], [REAR L], [REAR R],
output level.
[SUBWOOFER]
• Each value you have adjusted changes when
Output level: [–24] to [10]
you change the [POSITION] setting (page 15).
Menu Item
Description
CROSSOVER
Select a speaker unit (filter) to adjust the HPF or
LPF cut-off frequency and the slope for each
speaker unit.
For details on the [CROSSOVER] setting, see
page 13.
POSITION
[OFF], [FRONT LEFT] (front seat
Select a listening position to adjust the speakers'
left), [FRONT RIGHT] (front seat
output levels automatically and add a delay time
right), [FRONT] (front seats), [ALL]
that corresponds to the number and locations of
occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select or customize the time alignment settings
to reflect the distance between the listener's
Select a type of speaker and
position and each speaker.
adjust the speaker distance for
• Select [INITIAL] to initialize the setting value.
further customizing in [CUSTOM].
• Select [OFF] to reset all setting values to 0.
Types of speaker: [FRONT L],
• The [CUSTOM] setting is available when
[FRONT R], [REAR L], [REAR R],
[FRONT LEFT] or [FRONT RIGHT] is selected in
[SUBWOOFER]
[POSITION] (page 15).
Speaker distance (cm): [350] to
• The [CUSTOM] setting is not available when
[0.0]
[OFF] is selected in [SUBWOOFER] (page 15).
SAVE SETTINGS
[YES], [NO]
Save to later recall the following sound settings
at their current values: [CROSSOVER], [SPEAKER
LEVEL], [EQ SETTING], [POSITION], [TIME
ALGNMNT], [D.BASS], [SUBWOOFER].
LOAD SETTINGS
Load the sound settings, when you have already
performed [SAVE SETTINGS].
D.BASS (Dynamic Bass Enhancer/Club Sound Bass)
[OFF], [LOW], [HI]
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the system.
LOUDNESS
[OFF], [LOW], [MID], [HI]
Compensate for clear sound at low volume.
19_806_807ME_QRI3104(A5_Horizon)
15
En
DEH-X500BT/DEH-S4150BT
Advertisement
Chapters
