Dmx Mode - Pulse Impstar 40 Manual

To display the hours the lamp has been operating:
• Press the MENU button until "hour" is displayed
• Press ENTER and the total hours usage to date will be shown.
To display the software revision version:
• Press MENU until "Ver" is diaplayed.
• Press ENTER and the current version is displayed.

DMX MODE

• This mode allows the unit to be controlled by any universal DMX controller.
• Press MENU until "Addr" is displayed and press ENTER.
• Press UP or DOWN to select an address then press ENTER to set.
DMX CHANNEL VALUES (16 CHANNELS)
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
DMX Value Function
000-255 Pan 0°~ 540°
000-255 Tilt 0°~ 210°
000-255 Pan&Tilt Speed from fast to slow
000-255 LED Dimmer0%~ 100%
000-008 No function
009-255 LED Strobe slow to fast
000-255 RED LED Dimmer0%~ 100%
000-255 Green LED Dimmer0%~ 100%
000-255 Blue LED Dimmer0%~ 100%
000-255 White LED Dimmer0%~ 100%
000-255 5050 SMD Dimmer0%~ 100%
000-008 No function
009-255 5050 SMD Strobe slow to fast
000-010 No Function
011-044 5050 SMD section 1 Red
045-079 5050 SMD section 1 Green
080-114 5050 SMD section 1 Blue
115-149 5050 SMD section 1 Red mix Green
150-184 5050 SMD section 1 Red mix Blue
185-219 5050 SMD section 1 Green mix Blue
220-255 5050 SMD section 1 RGB
000-010 No Function
011-044 5050 SMD section 2 Red
045-079 5050 SMD section 2 Green
080-114 5050 SMD section 2 Blue
115-149 5050 SMD section 2 Red mix Green
9