Complete The Installation - Kohler K-1013 Installation And Care Manual

Drop-in acrylic baths
Hide thumbs Also See for K-1013:
Table of Contents

Advertisement

6.

Complete the Installation

Finished Deck/Comptoir fini/Cubierta acabada
Apply silicone sealant.
Appliquer du mastic à la silicone.
Aplique sellador de silicona.
Water-Resistant Wall
Material
Matériau
hydrorésistant du mur
Material de pared
resistente al agua
Framing
Cadre
Estructura
de postes
Finished Deck Material
Matériau du comptoir fini
Material de acabado de la cubierta
Apply silicone
sealant.
Appliquer du mastic
à la silicone.
Aplique sellador de
silicona.
Rim
Rebord
Borde
For Finished Deck Installations
If applicable, carefully remove the protective tape from the bath rim.
Cover the framing with water-resistant deck material.
Using silicone sealant, seal the joints between the bath rim edges and the
water-resistant deck material.
Tape and mud the water-resistant deck material.
Install the finished deck material 1/16" (2 mm) away from the rim. This will
create a groove to apply the silicone sealant.
Apply a bead of silicone sealant in the groove between the finished deck and the
rim.
For Finished Wall Installations
If applicable, carefully remove the protective tape from the bath rim.
Cover the framing with water-resistant wall material.
Apply a bead of silicone sealant in the groove between the edge of the bath deck
and the water-resistant wall material.
Tape and mud the water-resistant wall material.
Install the finished wall material 1/4" (6 mm) above the bath deck. This will create
a groove to apply the silicone sealant.
Kohler Co.
Finished Wall/Mur fini/Pared acabada
Water-Resistant Wall
Material
Matériau hydrorésistant
du mur
Material de pared
resistente al agua
Rim
Rebord
Borde
Finished Wall
Material
Matériau mur
fini
Material de la
pared acabada
Silicone Sealant
Mastic à la silicone
Sellador de silicona
17
Rim
Rebord
Borde
2x4 Studding
Montant 2x4
Postes de 2x4
1084212-2-C

Advertisement

Table of Contents
loading

Table of Contents