Siemens S7-1200 Manual page 37

6 LCCF_EnetScanner block
Name
data
valid
busy
error
isActive
status
diagnostics
The parameter „diagnostics" may be hidden in the block call.
1
EtherNet/IP Scanner
Entry-ID: 109782314, V1.1.0,
Direction
InOut Array[*] of
LCCF_typeEnetAdaptData
Output BOOL
Output BOOL
Output BOOL
Output BOOL
Output WORD
1
Output LCCF_typeDiagnostic
04/2021
Data Type
LCCF_typeEnetAdaptConfig.
Refer to the chapter 4.2.1
"Creating an Adapter
description" for details
List of data areas for each
configured EtherNet/IP adapter
to exchange data with.
TRUE indicates that the values
in the mapping variables are
valid.
FALSE some or all values are
invalid and should NOT be
used for process control.
TRUE indicates the CIP Client
block is actively processing
requests.
FALSE indicates the block is
not processing requests.
TRUE indicates that an error
occurred during the operation
of the block. Depending on the
type of the error indicated by
status (see below) cycling of
the enable flag may clear the
error.
FALSE indicates no error.
TRUE indicates the active data
exchange with all configured
devices
FALSE indicates, that at least
one device is not
communicating with the
Scanner.
Status information about the
operational state of this block.
For details see the chapter
Block status messages below
A structure containing
additional information in case of
an error, which are relevant for
debugging the CIP server
block. The content is of value
for the developer.
Description
37