Assembly; Installing The Wall Mount - Bissell ICONPET PRO 2746 Series Manual

Assembly

Go to BISSELL.ca/support for assembly videos.
1. 2.
Connect the Extension Connect the Hand Vacuum
Wand to Motorized Floor Assembly to the Extension
Cleaning Foot. You'll hear Wand. You'll hear a "click"
a "click" when they're when they're connected.
connected.
Installing the Wall Storage & Charging Station
Go to BISSELL.ca/support for more tips and video instructions on installing the Wall Storage &
Charging Station.
1. 2.
Open the Wall Storage Insert the tool holders into
& Charging Station, use the the side of the Wall Storage
bubble level to ensure it & Charging Station. To install
level and insert two screws the charging cord, remove the
power cord clip from the Wall
to secure to wall. In order to
charge the machine, ensure Storage & Charging Station.
the Wall Storage & Charging Insert the charging cord and
Station is mounted near a wall secure it with the charging
outlet. cord clip.
3. Make sure to charge your
stick vacuum before first use.
Refer to page 6, "Charging the
Battery" for instructions.
3.
Plug the power adapter
into the wall and place the
machine on the Wall Storage &
Charging Station for charging.
Refer to page 6, "Charging the
Battery" for instructions.
BISSELL.ca 5