Editing Avb Inputs - PRESONUS StudioLive III Series Addendum

1 Getting Started
1.3 Routing AVB Inputs
Select Network on Console
Select Network in UC Surface
1.3.1

Editing AVB Inputs

Stagebox Setup
AVB Inputs
NSB 16.8
Name: NSB 16.8
StudioLive 24R Preamp Permissions: All
Output Stream: None
NSB 8.8
AVB Inputs
Apply
A B
FX FX
C D
FX FX
EFFECTS MASTER MASTER CONTROL
If you would like the input source for any channel on your StudioLive Series III
console mixer to come from your StudioLive Series III rack mixer, select that channel
on your console mixer and enable Network as the Input Source. For example, if you
would like to use the guitar connected to Input 3 on your StudioLive 16R in any mix
on your StudioLive 32S, you would select Channel 3 on your StudioLive 32S and
enable Network as the input source.
If you would like the input source for any channel on your StudioLive Series III rack
mixer to come from your StudioLive Series III console mixer, select that channel
on your rack mixer in UC Surface and enable Network as the Input Source. For
example, if you would like to use the microphone connected to Input 30 on your
StudioLive 32S in any mix on your StudioLive 32R, you would select Channel 30
in UC Surface for your StudioLive 32R and enable Network as the input source.
To edit the default setting, press the AVB Inputs button on the Touchscreen.
This will open the AVB Input Streams menu.
To change a routing, press the Input Stream to which you'd like to
route and then use the value encoder to scroll through the Available
Streams list on the right. Tap on the desired routing to patch it.
Once an AVB Output Stream from the rackmount mixer is routed to an AVB
Input on the console mixer, it cannot be routed to another input stream.
StudioLive™ Series III
Stagebox Mode Addendum
5