Zte ZXHN F680 User Manual page 7

Indicator Status
Off
LOS Solid red
Flashing red
Off
Internet
Solid green
Flashing green
Off
Wi-Fi Solid green
Flashing green
Off
Phone1
Solid green
Phone2
Flashing green
Off
LAN1–
Solid green
LAN4
Flashing green
Off
Solid green
WPS
Flashing green
Off
Solid green
USB
Flashing green
Description
The device is powered off or the device received
optical power is normal.
The optical transmitter of the PON interface is
powered off.
The received optical power is less than the optical
receiver sensitivity.
The device is powered off or there is no WAN
connection with Internet properties configured, or
the session is disconnected on user request or
remote peer request (PPP disconnected, DHCP
address released or no static IP address available
on the Internet WAN connection).
There is IP connected (the ONT has a Internet
WAN IP address from IPCP, DHCP or statically
configured).
IP traffic is passing through the Internet WAN
connection (either direction)
The device is powered off or the wireless interface
is disabled.
The wireless interface is enabled but no data is
being transmitted or received.
Data is being transmitted or received on the
wireless interface.
The device is powered off or the device is unable
to register on the soft switch/IMS.
The device has registered on the soft switch/IMS
but no traffic is being transmitted.
The voice service traffic is being transmitted or
received.
The device is powered off or the network link is
not established.
The network link has been established but no data
is being transmitted or received.
Data is being transmitted or received via the
Ethernet port.
The device is powered off or the WPS function is
disabled.
Some device has connected the device Wi-Fi
using WPS.
Some device is trying to connect to the device
Wi-Fi using WPS.
The device is powered off or the USB interface is
not connected.
The USB interface is connected and operating in
host mode, but no data is being transmitted.
Data is being transmitted or received via the USB
interface.