Settings; Highway/City Mode - Cobra XRS 9630 Operating Instructions Manual

12 band ultra high-performance digital radar/laser detector with xtreme range superheterodyne technology
Table of Contents

Advertisement

Settings

Your Detector
Intro
Operation
Customer
Warranty
Assistance
Settings

Highway/City Mode

Your detector has a Highway mode and three different levels of City modes:
City X, City X Beep Off and City X+K. City X mode sounds a single beep when
Secondary Icons
the signal is first detected. City X Beep Off mode prevents all X band audio
alerts until the signal strength reaches Level 3. City X+K mode combines the
City X mode with prevention of K band audio alerts until the signal strength
reads Level 2. This will reduce false alerts while you are driving in or near
urban areas where there are many sources for conflicting X or K band signals
Notice
such as microwave towers and automatic door openers. The factory setting
is Highway. The factory City mode default setting is City X.
Main Icons
Set/City Button
Press and release
Intro
Operation
Customer
Warranty
Assistance
To Change From Highway Mode to City Mode
Press and release the
Tone
Visual Display
Secondary Icons
Set/City button.
One beep
c appears in the display
City Mode
NOTE
When you change to City mode, the unit will enter
N W
c
Notice
whichever city default mode is set at the time.
To Change From City Mode Back to Highway Mode
Press and release the
Tone
Visual Display
Set/City button again.
Two beeps
h appears in the display
Highway Mode
N W
h
10 English
Settings
Your Detector
Intro
Operation
Customer
Warranty
Assistance
Setting City Default
You can set the default level for City mode (City X, City X Beep Off and
City X+K) either in Program mode or directly using the Set/City button.
Secondary Icons
Notice
To Set the City Mode Default Directly Using the Set/City Button
Press and hold the
Tone
Set/City button.
One beep each time the
display cycles
Release the Set/City
None
button to select the
current display as
default.
To Set the City Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone
go to City.
One beep
One beep
Two beeps
City X Beep Off
City X
Beep Off
City X
Set/City Button
Press and hold
Press and
hold the
City
Set/City
X+K
button
City X
Beep Off
Visual Display
Cycles — see chart above
City X Beep Off,
City X+K or City X
Visual Display
City X Beep Off
City X+K
City X
City X+K
City X
City X+K
City X
Nothing Comes Close to a Cobra
®
11

Advertisement

Table of Contents
loading

Table of Contents