Cobra XRS 9630 Operating Instructions Manual page 7

EasySet Programming
Your Detector
Intro Operation Customer Warranty
Assistance
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
EasySet Programming Menu
Secondary Icons
Mode Tone Visual Setting Result
Set City Two beeps City X A single beep sounds when the
mode signal is first detected.
default*
One beep City X Audio for all X band alerts are blocked
beep Off until signal strength reaches Level 3.
Notice
One beep City X+K Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute Two beeps IntelliMute On All alerts (except for strobe signals
mode from emergency vehicles) are
automatically muted below the
engine rev point you set.
One beep IntelliMute Off Normal operation.
Set IntelliMute One beep Set IntelliMute Allows you to set the engine
RPMs (see page 14 rev point while using IntelliMute.
(not shown to set activation
if IntelliMute point)
is off)
AutoMute Two beeps AutoMute On The audio volume of all alerts will be
mode automatically muted after four seconds for
as long as the signal is detected.
One beep AutoMute Off All alerts will sound at full volume
for as long as the signal is detected.
Set compass One beep Set Compass Allows you to calibrate the compass.
(see page 16
to calibrate
compass)
Pop Detect Two beeps Pop Detect On Unit will detect Pop signals.
mode
One beep Pop Detect Off Unit not will detect Pop signals.
* The settings for these user modes can also be changed with the one button method.
See description of each user mode (pages 10 and 23) for details.
8 English
EasySet Programming
Your Detector
Intro Operation Customer Warranty
Assistance
Mode Tone Visual Setting
Result
VG-2 Detect Two beeps VG-2 Detect On Unit will detect VG-2 signals.
mode
One beep VG-2 Detect Off Unit will not detect VG-2 signals.
Secondary Icons
VG-2 Audio Two beeps VG-2 Audio On With VG-2 Detect on, the unit will give
mode (not audible alerts for VG-2 signals.
shown if VG-2
One beep VG-2 Audio Off With VG-2 Detect off, the unit will give
detect is off)
only visual alerts for VG-2 signals.
Notice
Spectre 1 Two beeps Spectre 1 Unit will detect Spectre 1 signals.
Detect mode Detect On
One beep Spectre 1 Unit will not detect Spectre 1 signals.
Detect Off
Spectre 1 Two beeps Spectre 1 Audio With Spectre 1 Detect on, the unit will
Audio mode On give audible alerts for Spectre 1 signals.
(not shown if
One beep Spectre 1 Audio With Spectre 1 Detect off, the unit will give
Spectre 1
Off only visual alerts for Spectre 1 signals.
detect is off)
SmartPower Two beeps SmartPower On SmartPower is on.
mode
One beep SmartPower Off SmartPower is off.
K or Ku Band Two beeps K or Ku Band On Unit will detect K or Ku Band signals.
detect mode
One beep K or Ku Band Off Unit will not detect K or Ku Band signals.
X Band Two beeps X Band On Unit will detect X Band signals.
detect mode
One beep X Band Off Unit will not detect X Band signals.
Set display Two beeps Display Dim Partially dimmed for dusk or night driving.
Dim mode
One beep Display More dimmed for dusk or night driving.
default*
Dimmer
One beep Display Dark Display is off.
Restore factory One beep Restore Factory Resets user modes and settings to
settings Settings factory default.
Exit program One beep EXIT PROGRAM Allows you to exit Program mode.
Nothing Comes Close to a Cobra ® 9