Honda CRF110F 2019 Owner's Manual page 82

1. Remove the oil fill cap/dipstick from the
right crankcase cover.
2. Place a drain pan under the crankcase.
3. To drain the oil, remove the oil drain bolt
(1) and sealing washer (2).
4. Install the oil drain bolt with a new
sealing washer.
Oil drain bolt torque:
24 N·m (2.4 kgf·m, 18 lbf·ft)
5. Fill the crankcase with the
recommended grade oil; approximately:
1.0 (1.1 US qt, 0.9 Imp qt)
6. Reinstall the oil fill cap/dipstick.
7. Start the engine and let it idle for 3 – 5
minutes.
8. 2 – 3 minutes after stopping the engine,
check that the oil level is at the upper
level mark on the oil fill cap/dipstick with
the motorcycle upright on firm, level
ground. Make sure there are no oil leaks.
NOTICE
Running the engine with insufficient oil can
cause serious engine damage.
(1) Oil drain bolt
(2) Sealing washer
(2)
(1)
71