2. If the adjuster is threaded out near its
limit or the correct freeplay cannot be
obtained using the cable adjuster (4),
loosen the lock nut (3) and turn in the
cable adjuster (4) completely. Tighten
the lock nut (3) and install the rubber
dust cover.
3. Loosen the front brake cable guide bolt
(5).
( )
(5) Cable guide bolt
4. Loosen the lock nut (6) at the lower end
of the cable. Turn the adjusting nut (7)
to obtain the specified freeplay. Tighten
the lock nut and check the adjustment.
If proper adjustment cannot be obtained by
this method, see your dealer.
(
(
B
B
(6)
(6) Lock nut
(7) Adjusting nut
(7)
)
)
(
(
A
A
)
)
(A) Decrease freeplay
(B) Increase freeplay
25