RIGHT SIDE COVER
Removal:
1. Remove the bolt (1) and collar (2)
securing the right side cover (3).
2. Pull the right side cover prongs (4) out
of the rubber grommets (5).
Installation:
1. Attach the side cover on the rear frame,
aligning its tab (6) with the lower edge of
the right fuel tank shroud.
2. Align the side cover prongs with the
rubber grommets. Press the side cover
into position.
3. Install the collar and bolt, and tighten
them.
44
(5)
(5)
(3)
(1) Bolt
(2) Collar
(3) Side cover
(6)
(2)
(1)
(4)
(4) Prongs
(5) Grommets
(6) Tab