Starting Procedure
This motorcycle has a fuel-injected engine.
Follow the procedure indicated below.
Any Air Temperature
1. (Using the start button)
With the throttle completely closed,
press the start button.
(Using the kickstarter)
Lightly depress the kickstarter until
resistance is felt.
Then let kickstarter return to the top of
its stroke.
With the throttle completely closed,
operate the kickstarter starting from the
top of the stroke, kick through to the
bottom with a rapid, continuous motion.
2. If you cannot start the engine, open the
throttle slightly (about 3 mm (0.1 in),
without freeplay).
about 3 mm (0.1 in),
without freeplay
NOTICE
Allowing the kickstarter to snap back freely
against the pedal stop can damage the
engine case.
49