Dim Control; Setting Dynamike - Cobra 25WXNWST How To Use Manual

25 WX NW ST Manual 3.3 6/15/99 1:10 PM
Operation
NB, OFF NB, OFF (Noise Blanker) Switch
(Noise Blanker )
Switch
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition interfer-
ence.
1 When switched to
Blanker is activated, providing increased noise
filtration.
When switched to
Blanking Filtration will be turned off.
ANL (Automatic ANL (Automatic Noise Limiter) Switch
Noise Limiter)
Switch
When switched to
1
Noise Limiter is activated.This helps reduce
noise created by the vehicle's electronics.
14
Page 14
NB position the RF Noise
OFF position Noise
CB/ANL the Automatic

Dim Control

Rotate the DIM knob clockwise for
1
maximum brightness; counter-clockwise
for minimum.

Setting Dynamike

This controls the microphone sensitivity
(outgoing audio level).
1 Initially, set fully clockwise so that maxi-
mum voice volume is available. Dynamike
may have to be reduced in some conditions.
Operation
Dim/Dyna
Control
Note
The Dim controls the brightness
of the front panel,signal strength
meter and channel display.
Setting
Dynamike
15