29 WX NW ST manual 3.3
6/15/99 2:53 PM
Operation
NB-ANL/ANL/
NB-ANL/ANL/OFF (Noise
Blanker/Automatic Noise Limiter) Switch
OFF (Noise
Blanker /
Automatic
Noise Limiter)
Switch
Note
The RF noise blanker is very
1
When switched to ANL the Automatic Noise
effective in reducing repetitive
Limiter is activated. This helps reduce noise
noises such as ignition interfer-
created by the vehicle's electronics.
ence.
When switched to NB/ANL position the RF
Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
16
Page 16
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Rotate the
RF Gain knob counterclockwise
1
to reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
Operation
RF Gain Control
Note
The RF Gain is used to optimiz e
reception in weak signal areas. .
17