Installing Alignment Pins; Figure 5. Alignment Pin Installation - Compaq SSL2000 Series Reference Manual

6 Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide

Installing Alignment Pins

Four alignment pins need be installed into the new drive prior to installation.
Each alignment pin consists of a plastic spacer (top hat) and a screw
( 1 Figure 5).
To install the alignment pins:
1. Place a plastic spacer onto each of the four screws.
2. Install the alignment pins at the locations shown ( 1 Figure 5).

Figure 5. Alignment pin installation

1
1
cc0022