Installing A Ptm; Attaching The Libraries - Compaq StorageWorks ESL9000 Series Installation Manual

This chapter describes how to install a PTM for a Compaq StorageWorks ESL9000 Series
tape library. Sections in this chapter include:
I

Attaching the libraries

I
Installing the PTM
I
Cabling the PTM
Attaching the Libraries
Up to five tape libraries can be attached using the PTM upgrade parts. All of the tape
libraries must be physically attached to one another. Repeat the following procedure for all
libraries in the configuration.
NOTE: It is recommended that all ESL9000 Series Tape Libraries in the MUSL set use the same
drive types. Check with your application software vendor if you want to mix drive types in the
MUSL library.
Chapter

Installing a PTM

2