. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+D=FJAH
Installing an Internal
DLT Drive
This chapter describes the procedure to install a Compaq DLT Drive in a
Compaq Server.
Installation involves the following steps:
Setting the SCSI ID
Preparing the server
Installing the DLT Drive
Reassembling the server
Completing the installation
SCSI-2 Controller Requirements
It is recommended that the server be equipped with a 32-Bit Fast-SCSI-2 or
higher controller for a 10/15 or 15/30-GB DLT Drive.
A 32-Bit Fast-Wide SCSI Controller is recommended for the 35/70-GB DLT
Drive.
Software and Tool Requirements
The following items are required for Compaq DLT Tape Drive installation:
Torx-T15 screwdriver
Compaq SmartStart and Support Software CD
Writer: Jim Belew Project: Installing an Internal DLT Drive Comments: 185292.002 final
E-CH2.DOC
File Name:
Last Saved On:
3/13/97 7:35 AM
2-1
Compaq DLT Drive User Guide