Westinghouse WSHPTCBN1901 Instruction Manual page 11

3. Press the MODE button (11) repeatedly to select one of the
following options:
• Fan
• Heater low – 1000W
•
4. To set the temperature, press the +/- buttons (15) to increase
or decrease the temperature to your desired level. The
temperature range is from 15°C to 40°C. When the set room
temperature has been reached, the heater will turn off and the
fan will turn on. The fan and heater will turn on and off to keep
the room at the set level.
NOTE: The heater must be set to a temperature level that is at least
a few degrees higher than the room temperature for the heating
function to be activated. If the heater does not appear to be
working, increase the temperature until the heating function turns
on.
5. To oscillate (swing) the heater through 45 degrees, press the
OSCILLATING button (14). The oscillating icon
when this function is on.
6. To stop the swing while the appliance is oscillating, wait
until the airflow is in the desired position and press the
OSCILLATING button (14).
7. The timer can be set to turn the fan or heater off in 1 to
12 hours. When the heater is running, press the TIMER button
(13) repeatedly to set the hours. The timer icon
display when this function is on. To turn the timer off, press the
TIMER button (13) repeatedly until 00 appears.
NOTE: When you are not changing the time or temperature
settings, the current room temperature will display.
8. Press the LIGHT button (12) repeatedly to select one of the four
available colors – blue, green, purple, white or off.
NOTE: The light can be turned on when the heater and the fan
are not in use.
HOW TO USE
Heater high – 1500W
displays
and h icon
EN
11