Operating Temperature; Operation Without The Remote Control - Danby DAS120GAHWDB Owner's Manual

OPERATING INSTRUCTIONS

OPERATING TEMPERATURE

Optimal performance for the cool, heat and dry
modes can be achieved in the following temperature
ranges. When the air conditioner is used outside of
these temperature ranges, certain safety protection
features will activate and cause the appliance to
perform less effi ciently.
Room temperature
Outdoor temperature

OPERATION WITHOUT THE REMOTE CONTROL

Operational functioning can be access through the remote
control. In the event that the remote control fails to work,
the appliance can be operated manually with the manual
control button located on the indoor appliance. Note that
manual operation is not an effi cient long-term solution
and that operating the appliance with the remote control is
recommended.
If the manual control button is pressed when the appliance
is turned off, the air conditioner will operate in auto mode.
If the manual control button is pressed when the appliance
is turned on, the air conditioner will turn off.
Note: The manual button is intended for testing purposes
and emergency operation only. Do not use this function
unless absolutely necessary. To restore regular operation,
use the remote control to activate the appliance.
To optimize the performance of the appliance:
• Keep doors and windows closed
• Do not block air inlets or outlets
• Regularly inspect and clean all air fi lters
• Limit energy usage by using the timer function
Note: When the outside temperature is below 0°C
(32°F), keep the appliance plugged in at all times
to ensure smooth ongoing performance.
COOL mode
16°C - 32°C
(61°F - 90°F)
0°C - 43°C
(32°F - 109°F)
3
HEAT mode
0°C - 32°C
(32°F - 90°F)
-7°C - 32°C
(19°F - 90°F)
DRY mode
16°C - 32°C
(61°F - 90°F)
0°C - 43°C
(32°F - 109°F)