Operation; After Finishing Work; Transporting; Transporting The Kombimotor - Stihl KMA 130 R Instruction Manual

English
1
► Push the release slide (1) in the direction of the loop
handle with your thumb and hold it there.
The LEDs indicate the selected power level.
► Push the release slide (1) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3.
► Push the release slide (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.
Every KombiTool can be operated with all three power
levels.

11.3 Operation

The method of operating the KombiMotor depends on the
KombiTool you are using.
► Operate the KombiMotor as described in the instruction
manual supplied with the KombiTool.

12 After Finishing Work

12.1 After Finishing Work
► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► If the KombiMotor is wet: Allow the KombiMotor to dry.
► Clean the KombiMotor.
42

13 Transporting

13.1 Transporting the KombiMotor

► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► Carry the KombiMotor properly balanced by the drive tube
with the KombiTool behind you.
► Transporting the KombiMotor in a vehicle: Secure the
KombiMotor so that it cannot turn over or move.

14 Storing

14.1 Storing the KombiMotor

► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► Mount the KombiTool as described in the instruction
manual supplied with the KombiTool.
► Check the following points when storing the KombiMotor:
– KombiMotor is out of the reach of children.
– KombiMotor is clean and dry.

15 Cleaning

15.1 Cleaning the KombiMotor.

► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► Clean the KombiMotor with a damp cloth.

16 Maintenance and Repairs

16.1 Servicing and Repairing the KombiMotor

The KombiMotor cannot be serviced or repaired by the user.
12 After Finishing Work
0458-805-9821-B