Maintenance; Specifications - Panasonic EY76A1 Operating Instructions Manual

Battery Recycling
EN
ATTENTION:
For environmental protection and recycling of materials, be sure that it is disposed of at
an officially assigned location, if there is one in your country.
IV. MAINTENANCE
• Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
V. OPTIONAL ACCESSORIES
• Use only suitable size of bit.
VI. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model No.
Screw
driving
Bolt fasten-
ing
WARRANTY SUPPLEMENT
The breakdown and damage caused by usage consistent for a long time (e.g.: factory work
on the assembly line, etc.) is out of warranty.
VII. SPECIFICATIONS
NOTE: Weight indication
Greater than or equal to 1 kg: indicated by 0.05 kg.
Less than 1 kg:
These symbols indicate separate collection of waste electrical
and electronic equipment or waste batteries.
More detailed information is contained in the full version Operat-
ing Instructions.
https://www.panasonic-powertools.eu/en/construction/documents.htm
Wood screw
Self-drilling screw
Standard bolt
High tensile bolt
indicated by 0.01 kg.
EY76A1
Φ 3.5 mm – Φ 9.5 mm
Φ 3.5 mm – Φ 6 mm
M6 – M16
M6 – M12
- 14 -