ClearSounds A1600E Operating Manual

ClearSounds A1600E Operating Manual

Dect 6.0 expandable handset
Hide thumbs Also See for A1600E:

Advertisement

CSC48

Operating Manual

Clearsounds® A1600E
DECT 6.0
Expandable Handset™
*Requires use of the A1600 Amplified Cordless Freedom
Deluxe Phone™
This manual is intended to be a brief overview of key
features. For complete operating instructions, please
V508
refer to the ClearSounds A1600 Operating Manual.
1 – ENGLISH
1 – ENGLISH

Advertisement

Table of Contents
loading

Summary of Contents for ClearSounds A1600E

  • Page 1: Operating Manual

    *Requires use of the A1600 Amplified Cordless Freedom Deluxe Phone™ This manual is intended to be a brief overview of key features. For complete operating instructions, please V508 refer to the ClearSounds A1600 Operating Manual. 1 – ENGLISH 1 – ENGLISH...
  • Page 2: Prior To Use

    PRIOR TO USE Congratulations on your purchase of the A1600E phone from ClearSounds Communications®. Please read this User Manual carefully in order to get the best use out of your new phone. This phone is designed for individuals with mild to severe hearing loss.
  • Page 3 wash basin, kitchen sink or laundry tub, in a wet basement or near a swimming pool) while in the bathtub or shower or when you are wet. If the phone becomes submerged in water, do not attempt to retrieve it until after you have unplugged the AC adapter from the electrical outlet and the line cord from the modular wall jack.
  • Page 4 polarity symbols. Use only batteries identified as acceptable and never use alkaline batteries, which can cause personal injury as well as damage to the unit. Hearing Aid Compatibility (HAC) This phone meets the FCC standards for Hearing Aid Compatibility. IMPORTANT: YOUR RECEIPT IS PART OF YOUR WARRANTY AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
  • Page 5: Installation Steps

    INSTALLATION STEPS █ Installation of Your ClearSounds® A1600E DECT 6.0 Amplified Cordless Freedom Deluxe Phone™ is easy. There are some basic steps you need to take when you set-up your If at any time you have questions about your phone after reading this manual, please contact the ClearSounds®...
  • Page 6 Base Desk/Table Mounting 1. Plug the AC power adapter into the jack on the back of the base, then plug the AC adapter into a standard electrical outlet or surge protector. Note: The adapter is required for the phone to work. Installing Batteries Three re-chargeable...
  • Page 7 Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3.
  • Page 8: Menu Navigation

    MENU NAVIGATION Screen Navigation If you press under the word Back on the screen from any menu, the phone returns to the previous screen. To return to the main screen at any time, press automatically return to the main screen from any menu if no key is pressed for 30 seconds.
  • Page 9: Basic Phone Functions

    BASIC PHONE FUNCTIONS Registering the Handset █ Up to 4 additional A1600E handsets can be registered to the base. 1. Before registering an additional handset to the base, you should press and hold the page key on the main base, for about 5 seconds and then release it.
  • Page 10 Turning the Handset “Power On/Off” Mode █ The A1600E handset can be turned to “Power Off” mode, which can be a convenient way to prevent the phone from ringing without having to change the ringer setting. When you turn the handset to “Power Off” mode, calls can’t be made or received until you turn the power back “On”.
  • Page 11: Handset Name

    PHONE HANDSET SETTINGS Handset Name █ This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name: 1. Press under the word Menu on the screen to display the main menu list.
  • Page 12: Base Selection

    This function allows you to know when the handset is out of range of the base, and a beep will sound. Your ClearSounds® A1600E comes from the factory preset for Out of Range Alarm ON. To change this setting: 1. Press under the word Menu on the screen to display the main menu list.
  • Page 13: Troubleshooting

    2. Check that the AC adapter is securely plugged into the A1600E base and electric outlet. 3. Check that the handset batteries are installed properly and are in full power (page 6-7).
  • Page 14: Technical Specifications

    Optional Headset: CS-900HS (connects easily to your phone’s 2.5mm Phone Headset jack for hands-free conversations). To learn more, call ClearSounds at 1-800-965-9043 or visit www.clearsounds.com A1600E 125dB SPL 7.5V, 500mA Ni-MH 1.2V x 3, 600mAh...
  • Page 15: Fcc Wants You To Know

    [US: CLSTE12B]. If requested, this number must be provided to the phone company. 2. If the ClearSounds® A1600E DECT 6.0 Amplified Freedom Phone™ with Full ClearDigital Power™ causes harm to the phone network, the phone company will notify you in advance that temporary discontinuance of service may be required.
  • Page 16 Company or to one of our authorized agents. Service can be facilitated through our office at: ClearSounds Communications, Inc. 1743 Quincy Avenue, Suite 155 Naperville, IL 60540 U.S.A Service Requirements...
  • Page 17: Industry Canada Cs03 Statement

    INDUSTRY CANADA CS03 STATEMENT This product meets the applicable Industry Canada technical specification. This is confirmed by the registration number. The abbreviation, IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
  • Page 18: Limited One-Year Warranty

    Be sure to save your sale receipt as the proof of purchase date should you need warranty service. Your A1600E comes with a (1) year limited warranty from the date of purchase. This product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use.
  • Page 19 WARRANTY CLAIM. Service in United States and Canada, contact: ClearSounds Communications Attention: Repair Center 1743 Quincy Avenue, Suite 155 Naperville, IL 60540 800-965-9043 Check our website www.clearsounds.com for additional information and to download additional manuals and information. 19 – ENGLISH...

Table of Contents