Battery Installation; Installation Des Piles - Fisher-Price J6900 Consumer Information

Table of Contents

Advertisement

Battery Installation

Hint: We recommend using an alkaline battery
for longer battery life.
Remarque : Il est recommandé d'utiliser de pile
alcaline, car elles durent plus longtemps.
Consejo: Se recomienda usar pila alcalina para
una mayor duración.
1,5V
"D" (LR20)
• Protect the environment by not disposing of
this product with household waste (2002/96/EC).
Check your local authority for recycling advice
and facilities (Europe only).
• Protéger l'environnement en ne jetant pas ce produit
avec les ordures ménagères (2002/96/EC). Consulter
la municipalité de la ville pour obtenir des conseils
sur le recyclage et connaître les centres de dépôt de
la région (en Europe seulement).
• Proteger el medio ambiente no disponiendo de este
producto con la basura del hogar (2002/96/EC).
Consultar con la agencia local pertinente en cuanto
a información y centros de reciclaje (solo Europa).

Installation des piles

+
• Remove the pad bottom pocket from the footrest.
• Retirer le repli inférieur du coussin du repose-pied.
• Desprender el compartimento inferior de la almohadilla
10
Colocación de las pilas
Pad Bottom Pocket
Repli inférieur du coussin
1
Compartimento inferior de la almohadilla
del reposapiés.
Battery Compartment
Compartiment des piles
2
Compartimento de pilas
• Insert a coin into the battery compartment door and
pry the battery compartment door off.
• Insert one "D" (LR20) alkaline battery into the
battery compartment.
• Replace the battery compartment door.
• Pull and fit the pad seat bottom pocket around the
soothing unit and footrest.
• Insérer une pièce de monnaie sous le couvercle du
compartiment de la pile pour le soulever et le retirer.
• Insérer 1 pile alcaline D (LR20) dans le compartiment.
• Refermer le compartiment de pile.
• Tirer sur le repli inférieur du coussin et le placer sur
l'unité de vibrations et sur le repose-pied.
• Introducir una moneda en la tapa del compartimento
de la pila y abrir la tapa.
• Introducir la pila alcalina tipo "D" (LR20) x 1,5V en
el compartimento de pila.
• Cerrar la tapa del compartimento.
• Jalar y ajustar el compartimento inferior del respaldo
alrededor de la unidad relajante y el reposapiés.

Advertisement

Table of Contents
loading

Table of Contents