Table of Contents
Advertisement
DAP-300P
4.
IPv4 address assignment. By default, the DHCP server of the device
in the access point mode is disabled (the Disable value is selected from
the Mode of dynamic
IPv4
tab). As a rule, the DHCP server should be disabled when the device
is used in the access point mode. If you need to specify other settings,
change the parameters of the DHCP server.
5.
After specifying the needed parameters on the Connections Setup /
LAN page, click the APPLY button.
IP
address assignment drop-down list
Quick Installation Guide
on the
40
Advertisement
Table of Contents
