Pc With Ethernet Adapter - D-Link DAP-300P Quick Installation Manual

Wireless n300 poe access point / router

Hide thumbs Also See for DAP-300P:

Table of Contents

DAP-300P

PC with Ethernet Adapter

1. Сonnect an Ethernet cable between the LAN port of the access point and

the Ethernet port of your PC.

2. For a switch supporting PoE: connect an Ethernet cable between the

PoE-enabled switch and the WAN port of the access point.

3. For a switch not supporting PoE or router: connect an Ethernet cable

between the switch or router and any Ethernet port of the access point.

4. Connect the power adapter (not included in the delivery package) to the

power connector port on the back panel of the access point, then plug the

power adapter into an electrical outlet or power strip.

Now you need to configure an IP address for the Ethernet adapter of your PC.

Quick Installation Guide

Table of Contents